installation and maintenance

How are the radiators mounted onto the wall?

The brackets supplied with the radiator must be attached to the wall. Then mount the radiator onto the brackets and plug into a standard 13 amp socket.

Do the radiators come filled with water already?

Yes. During production the radiators are filled with water and Fernox, which is a combination of rust inhibitor and anti-freeze. No additional water needs to be added.

Do the radiators need to be bled?

No – no maintenance needs to be done to the radiators at all. The life expectancy of the radiators is 10 years.

Do the radiators require any wiring?

No – simply plug into a standard 13 amp socket. If multiple radiators are installed into a dwelling please consult advice from a professional electrician.

Can the radiators be mounted vertically?

No – the radiators must be wall mounted horizontally

Are the radiators suitable for bathroom installation?

The radiator is a “class I” IP44 device and it can be installed in bathrooms zone 2 and 3 provided that no electric control unit can be touched by people 
using the bath-tub or the shower. If the radiator is installed in zone 2 or zone 3 it must be connected to a switched spur located in the appropriate zone.
 

Warning - The Timer range of radiators is not IP44 rated and therfore not suitable for installation in a bathroom or  similar environment.

Do you provide an installation service?

No – however installation is straight forward, simply wall mount onto the brackets supplied, plug-in and switch on.

How long is the warranty period?

Your radiator is automatically covered by a two year warranty from date of purchase. We undertake to repair or exchange within this period,
any part found to be defective due to a manufacturing fault. This warranty in no way compromises your rights under the law of statutory purchase of goods act.